Commercial electrical contracting in Gilbert, AZ
Much of Gilbert's newer commercial space sits along the Loop 202: medical office buildings, retail centers around SanTan Village, and restaurant pads near the freeway.
Free estimate in Gilbert
Tell us what is going on and we will set up a time to look at it.
Or call 602-935-7971
- ROC #368777, dual CR-11 license
- Written flat-price quotes
- After-hours work in occupied spaces
What to know in Gilbert
Many of those buildings were built as shells, so a TI there often starts from a house panel or meter section the landlord provided and runs distribution for the tenant's layout.
The Heritage District is the opposite case. Older buildings along Gilbert Road now hold restaurants and bars, and adding a kitchen or a patio bar to one of them can run into a small existing service, so we check the load before the design is final. The Town of Gilbert building and development services issues the permit for each project.
Commercial work in Gilbert runs through the local permit office and whichever utility serves the building. We handle both, size the service before you commit to equipment, and plan shutdowns around your hours so your Gilbert space can stay open while the work gets done.
What's included
- Plan review or a site walk of your Gilbert space
- Load calculations before new equipment is ordered
- Permits and inspections with the local building department
- Utility coordination for service upgrades
- Typed panel schedules and as-builts at closeout
- Permits
- Town of Gilbert building and development services
- Utility
- APS or SRP, depending on the address.
- Phone
- 602-935-7971
Looking for commercial electrical contracting near you?
Before anyone opens your panel, check for:
- An active Arizona ROC license in the right class (R-11, C-11 or CR-11)
- Proof of liability insurance and workers comp
- A written quote with the scope and the price
- A permit for work that needs one, pulled by the contractor for your address
- No large cash deposit before materials are bought
Free estimate in Gilbert
Tell us what is going on and we will set up a time to look at it.
Or call 602-935-7971
Common questions
What does commercial electrical cost in Gilbert?
It depends on the scope, the existing service, access, permit requirements and whether the work has to happen after hours. We review the plans or walk the space, then give Gilbert contractors, property managers and owners a written flat-price quote with the permit included.
How soon can you get to Gilbert?
Call 602-935-7971 or send a request with the form on this page and we will set up a time. Emergencies come first.
Do I need a permit for commercial electrical contracting in Gilbert?
Many jobs do, including new circuits and anything at the panel. In Gilbert, permits come from the Town of Gilbert building and development services. We check whether your job needs one, pull it, and schedule the inspection.
Can you build out a cold shell medical suite along the Loop 202 in Gilbert?
Yes. In a new shell building, the landlord often provides the service and a meter section, and the tenant's build-out adds the panel, branch circuits, lighting and equipment connections. We read the landlord work letter alongside the plans, so it is clear which parts are the landlord's and which are yours.
Can an older Heritage District building support a new restaurant or bar?
Often, with some work. Older buildings can have small services, dated panels and wiring from several past remodels. We open the panels, trace what earlier remodels left behind, and compare the existing service to the equipment and lighting plan, so you know early if the utility has to be part of a service upgrade.
Do you wire retail pads and storefronts near SanTan Village?
Yes. New retail pads need tenant panels, storefront and sign circuits, and site lighting tied into the landlord's controls. We build to the center's tenant criteria, coordinate the sign connection with the sign company, and plan inspections around the target opening date.
Do you work as a subcontractor for general contractors?
Yes. We bid from your plans and specs, list our assumptions and exclusions on the quote, and work to your schedule. RFIs go through you, change orders are priced in writing before the extra work starts, and rough-in and inspections are coordinated with your superintendent. Owners and property managers can also hire us directly for smaller projects.
Can you work after hours so the business stays open?
Yes. When a job needs the power off, we schedule it for night, early morning or a day you are closed, and you know ahead of time which circuits will be down. Work that does not need a shutdown can often happen during open hours in back rooms or closed-off areas.
Who does the work: your crew or subcontractors?
Licensed Precise Electrical electricians. The person who quotes the job can tell you who will be there.
Do you clean up after the job?
Yes. We protect floors and furniture while we work, patch small access holes we make, and haul away old equipment when we leave.
Commercial electrical nearby
The crew
Licensed electricians on every job
The electrician who looks at your job is qualified to do it. We photograph what we find and give you options when there is more than one good fix.
- Arizona ROC licensed and insured
- Photos and written findings on every job
- Permits and inspections handled
- Clean job sites and labeled panels
Arizona ROC License CR-11 #368777 · Look it up
Get a price for commercial electrical contracting in Gilbert.
Free estimates, written flat-price quotes and permits handled, anywhere in the Valley.
602-935-7971