Skip to content
Precise Electrical

Commercial electrical contracting in Phoenix, AZ

Commercial work in Phoenix covers office suites along the Camelback Corridor and in Midtown, medical and retail space across the city, and warehouses and flex buildings around Sky Harbor and in Deer Valley.

Free estimate in Phoenix

Tell us what is going on and we will set up a time to look at it.

Or call 602-935-7971

  • ROC #368777, dual CR-11 license
  • Written flat-price quotes
  • After-hours work in occupied spaces

What to know in Phoenix

Many office TIs happen in occupied buildings with management rules for after-hours access, freight elevators and shutdowns, so we plan the work with the property manager and the building engineer before the first night on site.

Industrial tenants near the airport and in Deer Valley tend to bring three-phase equipment, high-bay lighting and power for dock doors, so the first step is checking what the existing service can carry. Phoenix TI permits go through the City of Phoenix Planning & Development Department, which may require plan review before work starts, and we keep the electrical part of that submittal complete so it does not hold up the rest.

Commercial work in Phoenix runs through the local permit office and whichever utility serves the building. We handle both, size the service before you commit to equipment, and plan shutdowns around your hours so your Phoenix space can stay open while the work gets done.

What's included

  • Plan review or a site walk of your Phoenix space
  • Load calculations before new equipment is ordered
  • Permits and inspections with the local building department
  • Utility coordination for service upgrades
  • Typed panel schedules and as-builts at closeout
Permits
City of Phoenix Planning & Development Department
Utility
APS or SRP, depending on the address. The boundary between the two runs through the city.
Phone
602-935-7971

Looking for commercial electrical contracting near you?

Before anyone opens your panel, check for:

  • An active Arizona ROC license in the right class (R-11, C-11 or CR-11)
  • Proof of liability insurance and workers comp
  • A written quote with the scope and the price
  • A permit for work that needs one, pulled by the contractor for your address
  • No large cash deposit before materials are bought

Free estimate in Phoenix

Tell us what is going on and we will set up a time to look at it.

Or call 602-935-7971

Common questions

What does commercial electrical cost in Phoenix?

It depends on the scope, the existing service, access, permit requirements and whether the work has to happen after hours. We review the plans or walk the space, then give Phoenix contractors, property managers and owners a written flat-price quote with the permit included.

How soon can you get to Phoenix?

Call 602-935-7971 or send a request with the form on this page and we will set up a time. Emergencies come first.

Do I need a permit for commercial electrical contracting in Phoenix?

Many jobs do, including new circuits and anything at the panel. In Phoenix, permits come from the City of Phoenix Planning & Development Department. We check whether your job needs one, pull it, and schedule the inspection.

How do you handle building rules in Midtown and Camelback Corridor office towers?

We get the rules from the property manager before we price the job. Managed office buildings usually control after-hours access, freight elevator time, shutdown approvals and where materials can be staged. We schedule shutdowns with the building engineer and leave occupied floors working before tenants arrive.

Does a Phoenix office or retail TI need plan review before electrical work starts?

Often, yes, depending on the scope. Many tenant improvements go through plan review with the City of Phoenix Planning & Development Department before a permit is issued, and the city sets the review time. We make sure the electrical part of the submittal is complete and answer reviewer comments quickly.

Can you check whether a warehouse near Sky Harbor or in Deer Valley has enough power for our equipment?

Yes. We look at the service voltage and size, whether it is three-phase, and the load already on it, then compare that to your equipment list. If the building needs more capacity, you can weigh that before signing the lease, and we coordinate any service change with APS or SRP.

Do you work as a subcontractor for general contractors?

Yes. We bid from your plans and specs, list our assumptions and exclusions on the quote, and work to your schedule. RFIs go through you, change orders are priced in writing before the extra work starts, and rough-in and inspections are coordinated with your superintendent. Owners and property managers can also hire us directly for smaller projects.

Can you work after hours so the business stays open?

Yes. When a job needs the power off, we schedule it for night, early morning or a day you are closed, and you know ahead of time which circuits will be down. Work that does not need a shutdown can often happen during open hours in back rooms or closed-off areas.

Who does the work: your crew or subcontractors?

Licensed Precise Electrical electricians. The person who quotes the job can tell you who will be there.

Do you clean up after the job?

Yes. We protect floors and furniture while we work, patch small access holes we make, and haul away old equipment when we leave.

The crew

Licensed electricians on every job

The electrician who looks at your job is qualified to do it. We photograph what we find and give you options when there is more than one good fix.

  • Arizona ROC licensed and insured
  • Photos and written findings on every job
  • Permits and inspections handled
  • Clean job sites and labeled panels
Breaker panel wired with armored cable on a workbench

Arizona ROC License CR-11 #368777 · Look it up

Get a price for commercial electrical contracting in Phoenix.

Free estimates, written flat-price quotes and permits handled, anywhere in the Valley.

602-935-7971